Product name

Explosion Proof Vibration Fork Level Switch / Controller

Application

Tuning fork level switch for solid, vibrating rod level switch Tuning Fork Switch vibrates to tuning fork by piezoelectric crystal and inherent frequency of tuning fork.It can monitor continuously to the change of frequency. When the tuning fork switch is used for low alarm (or low position control), the medium in the vessel is discharged downward passing through the tuning fork.

Basic information

Detailed parameters

Product number

Affiliated category

Level switch

Heat

Quantity

- +

360° display

Download product manual

I want to inquire price

Product detail

相关视频

Tuning fork level switch for solid, vibrating rod level switch Tuning Fork Switch vibrates to tuning fork by piezoelectric crystal and inherent frequency of tuning fork.It can monitor continuously to the change of frequency. When the tuning fork switch is used for low alarm (or low position control), the medium in the vessel is discharged downward passing through the tuning fork.

When it is lower than the specific location and change the inherent frequency, this change is detected by electronic component, the output state is shifted; when it is used for high alarm (or high position control), the medium in the vessel go upward and contact with tuning fork which can shift the output state. changes, these changes are detected by the intelligent circuit, and converts it into a switch signal.

Tuning fork level switch Application:

1. Whatever feed,mud and drike or pulp,glue and dye.the level switch is suitable

2. Water, mineral water

3. Waste water, sewage, slurry, acid alkali solution

4. Beer, beer starter culture, juice, beverage

5. Paper pule, glue,dye,solid power and other similar good mobility materials

6. Diesel and other similar dangerous liquids/ hazardous conditions

Features:

1. High adaptation: no influence on electrical parameter and density of medium, suitable for various conditions. Scaling, stir, turbulent flow, bubble ,vibration, middle viscosity, high pressure, high temperature etc.

2. No calibration: no need for calibration on spot since no impact on electrical parameter and density of medium

3. Maintenance-free: no moving parts, no need to maintain after installation.

4. Various Power supply: he vibrating fork level switch is 20~250VAC, 20~60VDC,Suitable for all Power supply place.

5. Various Connection: The level switch with flange and thread connection for you reference.

Keywords

Level Sensor for Chemical Tank

Vibrating Tuning Fork Level Switch For Liquid

Electric Water Level Switch

PRODUCT DETAIL

Explosion Proof Vibration Fork Level Switch / Controller